Thursday, May 7, 2009

MACD

说简单点 就是得合着用 不要看单一信号 是一个动量的信号
今天就学MACD了 其他的不看 把这个彻底了解了

我被那些技术分析彻底搞晕 太复杂 受不了
还是下面这个比较实际
1)软件随便的一个就可以,同花顺,大智慧,通达信!!!免费就OK!!

2)指标:只要会MA就OK了,120,250很重要哦!!!!!

3)量是根本,必须会!!

4) K线形态,必须会!!!

5) 买股就一只,天天看着狗的,作足波段,不要贪婪其他涨的好的 ,别人的股票和你没关系!!!!

就看自己的,只关心自己的股票!!!重点是盘口的买卖单!!!

复习MACD

DIF就是差离值,即12日EMA数值减去26EMA数值.在持续的涨势中,12日EMA在26日EMA之上.其间的正差离值(+DIF)会愈来愈大.反之在跌势中,差离值可能变负(-DIF)也愈来愈大.至于行情开始回转,正或负差离值要缩小到怎样的程度,才真正是行情反转的讯号,MACD的反转讯号界定为「差离值」的9日移动平均值(9日 EMA).

The most popular formula for the "standard" MACD is the difference between a security's 26-day and 12-day Exponential Moving Averages (EMAs).

Usually, a 9-day EMA of MACD is plotted along side to act as a trigger line.

DIF就是MACD.
DEA是DIF的9日移动平均值.
柱状图是DIF-DEA


咋判:

MACD正意味着MA12在MA26之上,如果MACD正而且还在上升,证明上述两均线的gap加大,正的动量上升,这是一个牛的时期。反之,又是负的,又往下降,说明MA12在MA26之下,负向的动量上升,这是一个熊的时期。

牛的信号:
1.positive divergence
股票价格还在下行,但是MACD线已经开始上升。这表现在MACD形成的最低点越来越高(higher lows),也就是说后一个低点高于前一个低点。这个信号不常见 但是却比较可靠。

2.Bullish Moving Average Crossover
就说MACD线上穿他的九日均线,也就是DIF上穿DEA。这个信号用的最多,但也是最不可靠的。它可以用来验证positive divergence.如果这个上穿发生在MACD线产生的第二个higher low,就证明这个positive divergence 是可靠的。

对这个上穿使用价格过滤器验证,如果在上穿之后,MACD有3天都在它的九日均线上,就说明这个上穿是可靠的。


3.Bullish Centreline Crossover
中线上穿指的是MACD穿过零线进到正值范围。这表明动量已经从负变正。在一个positive convergence和一个bullish centreline crossover后,这个上穿可以认为是一个确认的信号。这个信号是第二常用的信号。



用法当然是上面三个合起来用好了,下面是一个三个指标都牛的例子。先是positive divergence,然后是MACD上穿九日均线,然后是上穿零线。




下面就是熊的用法,懒得翻译了
全贴上、
Bearish Signals
MACD generates bearish signals from three main sources. These signals are mirror reflections of the bullish signals:

Negative Divergence
Bearish Moving Average Crossover
Bearish Centerline Crossover
Negative Divergence
A Negative Divergence forms when the security advances or moves sideways, and the MACD declines. The Negative Divergence in MACD can take the form of either a lower High or a straight decline. Negative Divergences are probably the least common of the three signals, but are usually the most reliable, and can warn of an impending peak.



The FedEx (FDX) chart shows a Negative Divergence when MACD formed a lower High in May, and the stock formed a higher High at the same time. This was a rather blatant Negative Divergence, and signaled that momentum was slowing. A few days later, the stock broke the uptrend line, and the MACD formed a lower Low.

There are two possible means of confirming a Negative Divergence. First, the indicator can form a lower Low. This is traditional peak-and-trough analysis applied to an indicator. With the lower High and subsequent lower Low, the uptrend for MACD has changed from bullish to bearish. Second, a Bearish Moving Average Crossover (which is explained below) can act to confirm a negative divergence. As long as MACD is trading above its 9-day EMA, or trigger line, it has not turned down and the lower High is difficult to confirm. When MACD breaks below its 9-day EMA, it signals that the short-term trend for the indicator is weakening, and a possible interim peak has formed.

Bearish Moving Average Crossover
The most common signal for MACD is the moving average crossover. A Bearish Moving Average Crossover occurs when MACD declines below its 9-day EMA. Not only are these signals the most common, but they also produce the most false signals. As such, moving average crossovers should be confirmed with other signals to avoid whipsaws and false readings.


Sometimes a stock can be in a strong uptrend, and MACD will remain above its trigger line for a sustained period of time. In this case, it is unlikely that a Negative Divergence will develop. A different signal is needed to identify a potential change in momentum. This was the case with Merck (MRK) in February and March. The stock advanced in a strong uptrend, and MACD remained above its 9-day EMA for 7 weeks. When a Bearish Moving Average Crossover occurred, it signaled that upside momentum was slowing. This slowing momentum should have served as an alert to monitor the technical situation for further clues of weakness. Weakness was soon confirmed when the stock broke its uptrend line and MACD continued its decline and moved below zero.

Bearish Centerline Crossover
A Bearish Centerline Crossover occurs when MACD moves below zero and into negative territory. This is a clear indication that momentum has changed from positive to negative, or from bullish to bearish. The centerline crossover can act as an independent signal, or confirm a prior signal such as a moving average crossover or negative divergence. Once MACD crosses into negative territory, momentum, at least for the short term, has turned bearish.



The significance of the centerline crossover will depend on the previous movements of MACD as well. If MACD is positive for many weeks, begins to trend down, and then crosses into negative territory, it would be bearish. However, if MACD has been negative for a few months, breaks above zero, and then back below, it might be a correction. In order to judge the significance of a centerline crossover, traditional technical analysis can be applied to see if there has been a change in trend, higher High or lower Low.

The Unisys (UIS) chart depicts a Bearish Centerline Crossover that preceded a 25% drop in the stock that occurs just off the right edge of the chart. Although there was little time to act once this signal appeared, there were other warnings signs prior to the dramatic drop:

After the drop to trend line support, a Bearish Moving Average Crossover formed.
When the stock rebounded from the drop, MACD did not even break above the trigger line, indicating weak upside momentum.
The peak of the reaction rally was marked by a shooting star candlestick (blue arrow) and a gap down on increased volume (red arrows).
After the gap down, the blue trend line extending up from Apr, 1999, was broken.
In addition to the signals mentioned above, a Bearish Centerline Crossover occurred after MACD had been above zero for almost two months. From 20 Sept on, MACD had been weakening and momentum was slowing. The break below zero acted as the final straw of a long weakening process.